AUSSIE BUELLERS.. ecm tuning??

[fitzy2824]

I have asked around and i cant find anybody with the know how to do a re-map on my 08' xb12.. ive read about how to do it and i dont trust myself to have a go at it I am in swan hill, northern victoria, about 3 hours from melbourne.. if anyone knows of anybody or a decent performance shop please yell out!! will travel to adelaide/melbourne/or up the east coast possibly!

Cheers Fitzy

 

[okey]

Mate i am in Sydney and i can only find one place that knows a little about our bikes but still don't fill me with confidence.What are you trying to get a remap for? have you changed the pipe and if so what type? It's a shame (and a blessing) that Buell's are uncommon in aust. ay Fitzy

 

[fitzy2824]

yea that is exactly right, definatly not many around aus.
when i brought the bike off the dealer this time last year i wanted it with a remus pipe and K&N filter, the dealer said yea we can do that and dynotune it and everything.. i think when they put the pipe and filter on they worked out they couldnt tune it like the pre 08' models and just sent the bike back to me with the k&n in and pipe on.. ran like shit, replaced stock filter as recommended on BUELLXB (cheers fellas) and its been like that for 10 months now. where was the joint you found??

 

[gbalias]

do you have the cable and ECMSpy?

 

[fitzy2824]

nah i downloaded the ecm spy and had a read of what it said and thought that was something better off left to someone who knows what there doing!

 

[okey]

fitzy i have heard that Blacktown Harley and Buell (outer suburb of sydney ) are knowledgeable on Buell's and they race em . I am not sure in what class (drags ,circuit etc) but i once made a enquiry about a new bike and the salesman said they are the best at service and repairs (wouldn't be hard around here ) however they didn't bother ringing me back when they had the exact bike i wanted there on the floor so i didn't persue any further.Got my bike of frasers @ homebush and they suck

 

[gbalias]

year/model of bike?

 

[fitzy2824]

08' xb12. yea i might give blacktown a ring and see what they got to say. cheers okey.

 

[gbalias]

i think your best bet for a perfect tune is to get the xb9 ecm and put the xb12 file on it. then itll communicate with Spy.

 

[fitzy2824]

oh yea, good idea i would never have thought of that.. im guessing its been done before yea and works ok?? what would a XB9 ecm be worth? why XB9 and whould it matter what year the ecm came from?

 

[08xb12r]

Have you considered the Remus Powerizer?

 

[fitzy2824]

Have you considered the Remus Powerizer?

i had looked at that but when i looked it was not available for 08' models, but just took a look and see that it is now for 08's.. how good are they?? do they work for a K&N and the exhaust mods??