hey i have a 2008 XB12R that keep blowing the 15amp ignition fuse, i put a new 15amp fuses in and sometimes it will last a couple of weeks other times it will blow straight away, any suggestions on how to fix this problem would be appreciated
You will have to trace the wires and look for loose or damaged wires. Make sure all grounds are good. Worst case you have to test out harness. I would start with a look-see first, shake all connections.
Have you made ANY changes recently? I had a short in a blinker a week or two after installing them. It wasn't a wire I could see.. It was just the last few things I had done and the socket for the light bulb is what was doin it.
i haven't made any changes recently, went through had a look at all the wiring couldn't find anything an relays appear fine. put a new fuse in an it appears to be going ok so far so i dont know whats happening
