buell 2009 problem with engine

[rkadlcek]

Hi I am from Czech Republic and I received advice from us or one HD I need advice. Motorbike me shooting into the exhaust into the airbox. The engine stops or places to ride him not to approach it is 2009 and I can not mechanically reset TPS because it has controlled electronically tailpipe is carved and ECM mam race unfortunately I do not know if it still does not return original ECM that it helped and I've already bought the original tailpipe strsiho of year but it too did not help I already desperate and do not know what I was thinking if he can not play ECMspy help but can not find any compatible for the year 2009 or maps, and yet I wanted to ask someone if we do not know to do is reset the TPS and somehow I heard otherwise of the meters in 2009, resulting otcit motorcycle gas motorcycle, and then turn on after 20 seconds of adjustable sam please consult any information is good to me.....................

 

[jimijeans]

Don't know what you have done to the bike but this is the proper KEY Turn method to RESET TPS. Make sure the Bike is in Neutral first.
Since you are in another part of the World,The 2008/2009/2010 Buells have a Key Turn Method. If you have Hooked up Only ECM Spy with out [ECM Read] plus the Drivers are needed also, to a newer Bike you have done it Wrong.
If you have installed a Race ECM and hooked up ECM SPY to it you have done it wrong.The Race ECM is Protected and you will corrupt the ECM. This is the Easiest way to Explain to you. If you have a STOCK ECM that works that came OFF the Bike put it back on to get the Bike running.
You need more than just ECM Spy to work on the Newer Buells. The poping back through the Air Box is usually the Throttle position Sensor needs to be Reset. The Bike will not run if you don't do this properly.TPS Reset is necessary to make the bike Idle properly.
Do not know if this will help Because your Description of the problem is Very hard to understand. (Try This) TPS Reset First.
Turn on Start/kill switch. Do Not start the bike.
Turn on The Key switch. Do Not try to start the bike.
Twist the Throttle to WIDE Open Firm for one second.
Let Throttle Return to Close one full Second firm.
DO This ONLY 3 Times-total- NOT 4 times.
Turn off the KEY switch only. Do not touch the Start/kill button.
Turn on the Keyswitch, LET the Fuel/Yellow Engine light go off.
Do not Snap the Throttle.
Keep your hand on the Throttle the whole time you are Resetting TPS. Do this procedure smoothly!
Now try to start the bike. DO Not touch the Throttle while trying to start the Engine. Do Not Twist the Throttle while Starting the Bikes Engine.
Hope this is all that is Needed to get your Bike Working.*Jimi