Buell Blast turn signals don't work

[bobaganoosh]

Well the turn signals on my wifes blast werent working on the right side so i was messing around with the front one and realized the connection was bad. i put a new conector on and i was seeing if it was gonna work and i accidentally touched the wire to the headlight and it sparked and shorted out. the turn signals quit working all together but everything else still works. My fuses are all still good. I can put power directly to the flasher relay and the turn signals work so im not sure what else could be the problem. Could i have burnt through a wire somewhere?

Thanks for any input

 

[ezblast]

Flasher

 

[bobaganoosh]

but theres no power even at the flasher. when the flasher went on my xb the turn signals still worked just the didnt blink. i guess its worth a shot. thanks ez

 

[ezblast]

Check the fuse base as well. But a new flasher and fuse should do it, barring bad wiring.
http://www.amazon.com/Tridon-EP36-Flasher/dp/B00064LQLC
Get this flasher, it will also work if you get LEDs later.
EZ

 

[bobaganoosh]

what do u mean by fuse base. and which fuse runs the turn signals? its the same one as the rest of the lights right?

 

[ezblast]

The base of the fuse box may have some dirt in it, carbon, etc., clean it, no big deal - make sure the wire connections to the box are clean and solid as well.
EZ