Buelltooth Error

[_aNoN_XBscg]

What's up y'all,

First time posting here so forgive my ignorance. I've tried looking up this issue but can't seem to find a resolution or even an explanation so I thought I'd borrow some wisdom from y'all.

In short my 09 XB12SCG is giving me ignition/idle problems. I was able to snag a Buelltooth Dongle awhile back and just picked up a cheap android tablet (I'm an Apple guy so this might be part of the issue.) Here's where I'm at:

1. Connect dongle to diagnostic port (pretty sure it's the right one)
2. Ignition on
3. Run switch on
4. (Buelltooth flashes red repeatedly)
5. Open ECMdroid, Protocol set to Stock/P&A
6. Hit the red connect button
7. Select Buelltooth in Paired Devices menu

This is what happens in the "Read EEPROM" box. Connecting to BUELLtooth --> Reading ECM Identification --> Timeout reading 0 from 6 bytes.

I've tried uninstalling the app. Reconnecting the dongle. Reinstalling. Repairing. And nothing. Same issue every time.

Anyone run into this before? Help!:crushed:

 

[Barrett]

https://www.buellxb.com/forum/showthread.php?54912-Timed-out-reading-0-from-6-bytes\

Contact Dave @ Revmoto. Likely a faulty unit.

 

[_aNoN_XBscg]

Well...I never even considered that could be the issue.

Will do! Thanks!