Clutch hook up help

[Jevanof]

I am in the final stages if building a sportster with a 99 x1 motor, I am at the point where I need to hook up my clutch cable and I believe I am missing parts or / and I have the wrong cable. Below are the pics please advise me what I need

Thanks

 

[Jevanof]

 

[Jevanof]

 

[Mope]

Definitely see that your spring and lockplate aren't in the pictures......it would thread into your adjustment screw as the last piece in. Anyone else have concerns about that cable? Looks like it should turn sideways to seat

 

[konarider94]

Looks like you have an extra release plate because one is already installed in the pic above. The item above the clutch ramp.

You seem to be missing items 4,5,6,10. If cable is the right length it looks okay to me from that end.

 

[Jevanof]

Perfect, thanks

 

[Mope]

Right on kona......looked for that blowup in the online manual and didn't find it. The coupler makes the conversion.

 

[Jevanof]

Also, is installing these parts pretty straight forward?

Is there a gasket needed for the cover?

 

[konarider94]

see item 3 where it says clutch cover gasket.....?

 

[Jevanof]

lol, yea, i must have missed that, how hard is it to install the clutch cable?

 

[konarider94]

you just screw it in the hole until it bottoms. do not overtighten, it will break right off.

Then follow this procedure.