converting a 9s front end to an "r"

[nogoals]

I am looking for a complete parts list to convert the front end of my 9"S" to the "R".

Can someone also confirm if the wiring is an issue? I have read there is a different wiring harness on the "S" than the "R" and going from an "R" to an "S" is where the issues are. Since im trying to go from an "S" to an "R" i dont expect an issue......

 

[BuellPartsGuy]

*sigh* I wonder who is going to come up with that...

What year is this thing first off?

What color fairing do you want?

What color winscreen do you want?

What mirrors do you want? Short? Long? 1125R?

 

[nogoals]

sigh??? sheesh that hurts...

It's an 03 sir.

Black please.

You pick.....

hmmm im thinking shorties ...but the 1125's are nice...

preciate the help....

 

[scobbie001]

hmmm im thinking shorties

You probably don't want to do that. The longer stalked mirrors look just as good, and are much much more functional.

 

[BuellPartsGuy]

lol, just playing with ya..

Now this is a pretty accurate list. This is everything I can see that you need comparing the two parts books here in front of me. I have the compete bike harness on there because unless you want to mutilate your stock harness to relocate everything to get it to fit in the new fairing. I also have the new ignition switch on there because they mount differently and you would have to order it to your original key code, otherwise your seat lock would be different.

If you have a fax number, it would be 10 times easier just to fax it over. Its about 30 lines long. If you dont, thats fine I will end up typing it out. Just let me know

e-mail me your fax to [email protected]

 

[LeFox]

If you have a fax number, it would be 10 times easier just to fax it over. Its about 30 lines long. If you dont, thats fine I will end up typing it out. Just let me know

take a picture of it or a scan...then you don't have to type it out

 

[BuellPartsGuy]

J1105.02A8A - Upper triple clamp - 130.00

J0135.02A8A - Steering stem nut - 8.15

AA0608.2CXZB - Screw - 2.90 x 3

AA0508.2CXZB - Screw - 2.25 x 2

N0002.02A8 - Handlebar - 20.35 x 2

N0050.K - Left Grip - 6.15

N0307.02A8A - Idle cable - 16.70

N0308.02A8A - Throttle cable - 21.00

38627-02C - Clutch cable - 35.80

N0010.02A8 - Handlebar end cap - 2.50 x 2

M1646.1AAMBK - Front fairing kit (black) - 132.00

M0703.02A8 - Well nut - 2.35 x 6

N0161.02A8 - Left mirror - 26.00

N0162.02A8 - Right mirror - 26.00

M0073.02A8 - Fuse block bracket - 3.00 x 2

AA0406.21CRZ - Screw - 0.25 x 4

D0060.2CZ - Nylock nut - 0.30 x 4

Y0400.02A8 - Low beam housing - 55.75

Y0427.02A8 - High beam housing - 55.75

0438.02A8A - Headlamp support bracket - 40.95

YH402.02A8 - Headlight harness - 10.65

DA0400.2CZ - Locknut - 0.75 x 2

AA0406.5CZB - Screw - 1.20 x 2

D0500.1CZ - Nut - 0.30 x 3

B0510.1Z - Washer - 0.50 x 3

M0649.01A3 - Dash panel grommet - 1.40 x 3

BA0511.2Z - Washer - 0.25 x 5

AA0522.2CZB - Screw - 2.85 x 2

AA0524.2CZB - Screw - 5.85 x 2

L0940.02A8 - Fairing support bracket - 137.00

58785-02Y - Windscreen (black) - 79.95

C0039.02A8 - Wire Harness clamp - 4.30

Y0136.02A8 - Main wire harness - 300.00

Y0724.02A8 - Ignition switch - 104.00 (Need Key Code)

All prices are for a relative idea only. Not an exact quote. Figure on a total of around $1425 after tax.


Phew....


And just a side note, I had the short mirrors on my bike and rode with the long stem ones before. I didn't notice enough difference to see changing to the long stems. Plus the shorties look better.

 

[nogoals]

thanks...helluva thing to type up.

 

[jjfirebolt]

hey i have a 2003 xb9r and would love to trade front ends with you let me know if you are interested

 

[thrstrmech]

I know this is an old topic, but does anyone have pics of the conversion step by step? specifically the wire harness, as I've read the connectors differ from the S and R models, has anyone made a pigtail/adapter to bridge 'em instead of changing or hacking up the original harness?

 

[freak2180]

Its really easy.............almost retardedly easy.

Get all the parts you want and start bolting them on. Headlights will have to be spliced but thats easy. Cut the plug off your lightning assy or remove the pins from the plug.......do the same with the fire bolt Headlights and reassyemble them. You will end up with a extra wire as the firebolt is a 3wire vs the lightnings 4 wire. Sounds hard but it aint.

 

[thrstrmech]

freak ...thanks, just really looking at the headlight conversion/wire harness connection set up...not going for the full on fairing

hint: check out the latest pics in my gallery

 

[gtp3800]

you dont need a wire harness, just pull the pins out of the plug and its a matter of rearranging them. I cut them, but they do pop out if you have a pin or something.

 

[thrstrmech]

gtp3800, thanks...this is what my project involves, but with the Bolt lights using the Lightning windscreen

 

[ASH]

Nogoals,

PM sent...

 

[freak2180]

Um..... Ash....... You do realize that NoGoals only has 3 post and they are all in this topic.....

 

[ASH]

Freak... That was the 2nd thing I noticed, but he did join in 2008, but thanks for trying to keep me in line!

Nogoals... I have some parts both new in box and some that I have acquired from other forum members if you decide to do the conversion, hit me up.

 

[freak2180]

Im sure that after 4 years and no more post that he either figured it out or sold the bike, but good luck with the sale.