-
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
Crossroads Bars Triple Tree Bolts
- Thread starter BuellMeIn
- Start date
Help Support Buellxb Forum:
Cooter
Well-known member
The stock allens work so HD will have some. If you want them cheaper and don't feel confident to ID them yourself, take one to a Hardware store (NOT Home Depot) and have them see. They should have a bolt guide there to do it your self too.
They are allen bolts, but don't get the usual "black oxide" as they will rust immediately outside. Get zinc plated or stainless and use a tiny bit of anti-seize. The load on them is negligible.
Do NOT over-torque them! It's less than you think. Spec in the manual.
They are allen bolts, but don't get the usual "black oxide" as they will rust immediately outside. Get zinc plated or stainless and use a tiny bit of anti-seize. The load on them is negligible.
Do NOT over-torque them! It's less than you think. Spec in the manual.
Barrett
Well-known member
The 4 stock handlebar clamp bolts are 5/16th-18 and 1" in length. They are Allen head and readily available anywhere.
You're welcome
