Details, Details

[CanadianRocky]

Here are some picts of what I did today. There will be more as I work through outfitting the bike. The Decals are of excellent quality. The applications of the decals are more of an Amateur quality.... I would suggest if you want to do this kind of work, get a few extra decals and learn how to do it on someone else's motorcycle first. Then start with the small decals first, then work your way to the bigger one. I did the opposite, and you can see the result in the Shield on the bottom left side. I wont be happy with that, and will probably order more decals and redo the ones I dont like.

I got the decals from SportbikeStickerShop.com. It was easy to order from them, and it took about 2 weeks to get them. Which is pretty good taking into account they came from California to Canada.

In the first one you can see the Front FlyScreen (which it looked to me like it was missing something), the original decal from the factory shield which I put on the windshield, and the decal on the frame. In the second pict you can see the frame itself. The Windshield one came off of the Uly flyscreeen quite easily. I just put it under the hot water from the kitchen tap to heat up, then removed it very slowly and carefully with an Exacto Knife.

Of course, stand back, and it looks better once you get the over all pict. Thats the Third one.

 

[CanadianRocky]

A few upgrades. RotoPax 2 Gallon gas can and their Storage container attached to the Back Rest in the down position. That increases my range by 50% and just by getting another extension and gas can, it will double the stock bikes millage between gas stops.

A First Gear Dry Pack 70 ltr bag for camping gear, with a spot on both sides for my Klim riding gear on each side when not being worn. A new Zero Gravity windshield.

Next I will be installing Aluminum Panniers and top box when they get here in the next few weeks. My Dry Pack 25 ltr bags should fit right in them.

 

[Beastrider]

where did you get those screen brackets?