Engine light from old exhaust

[jdbuell]

Im doing some mods to keep me busy over the winter and since the Jardine has been mounted, (two years now), the light for the factory exhaust valve is always on.
Does anyone knowhow to clear it or trick it into thinking that the old one is still there. I would like to have the light come on for when there is a real problem.
I did a search on the forum but did not find anything so far.

 

[Xb12sLt]

For a quick fix just plug in the exhaust servo and leave the cable off.

 

[kyle_dewald]

If you have the cable you can disable the servo within the ECM using ECMSpy

 

[Xb12sLt]

Or that

 

[jimijeans]

American Sport Bike/has a part for that check it out Plugs right in .Ecm Spy w/ work if you have all the hardware for it .

 

[dave_xb12r]

Or you can use a power drill to drill out the warning light.......






Not serious at all in case you were wondering.

 

[d_adams]

Drill it out? Wow.

[smirk]

 

[Alfatango1]

Black electrical tape cut into a circle.

 

[crxtasy169]

Ecm spy I believe you can turn it off if I remember correctly. or Americansportbike.com has a valve eliminator.

 

[anrkizm95]

or you can make your own emulator diy emulator

 

[jdbuell]

Thanks for the advice. Will a EBR ECM also solve the problem? I just ordered one for my 08'Ss with a Jardine.

 

[anrkizm95]

yes

 

[jdbuell]

Problem solved!!!!!!