So, for the sake of my hearing, I'm switching from a Jardine back to a stock muffler (yes, i am fine with the loss of hp/tq if it means i won't go deaf). I bought the bike used and it came with a Jardine, but got a stock muffler off ebay.
So here's the dilemma: the stock muffler has some rust on it, not a lot, but significant. Should I.....
a) just run it like that and not care
2) sand off the rust spots and coat it with hi-temp paint
tres) strip the paint off the pipe and re-coat
IV) get it jet-hot ceramic coated (they do a sand-blasting and thermal degreasing prior to coating)
**aside: one concern I have is that the interior rust will eventually eat the pipe away from the inside and the only option that addresses this is IV
what say ye, buellxb?
So here's the dilemma: the stock muffler has some rust on it, not a lot, but significant. Should I.....
a) just run it like that and not care
2) sand off the rust spots and coat it with hi-temp paint
tres) strip the paint off the pipe and re-coat
IV) get it jet-hot ceramic coated (they do a sand-blasting and thermal degreasing prior to coating)
**aside: one concern I have is that the interior rust will eventually eat the pipe away from the inside and the only option that addresses this is IV
what say ye, buellxb?