Front rotors

[roadrocker]

Anyone have problems with wrapping front rotors ?

 

[konarider94]

are you giving one away as a gift or something?

 

[JOEL9]

no problems here, try not to rip the paper, the rotors have sharp edges[up]

 

[roadrocker]

a bunch of jokers around here i guess

 

[konarider94]

haha thanks for being a good sport. check out that thread.

i assume you were asking about warping rotors, and [up] Joel

http://www.buellxb.com/Buell-XB-Forum/Buell-Firebolt-XB12-XB9/Troubleshooting/wobbly-front-brake.

 

[Loki]

Well i believe the guys here would like alittle more info then provided seeing as "wrapping" the huge metal disk that your caliper squeezes to stop you, is not the normal thing to do and is quite impossible. But if you are refering to your headers... thats a different story.

 

[jimijeans]

Are you talking about the One front Rotor disc? Its a floater so check the bolts and the springs look up the PDF manual at the top of the page. the exploded view may help.[smirk]

 

[delta one]

the stock pads are notorious for building hot spotting onto the rotor and giving the feeling of a warped front rotor.

a good rotor cleaning and new pads are probably in order, ASB sells a rotor hone that should help or you can use a fine grit sandpaper.