neilrl79
Well-known member
One of the things I find annoying about my bike is the few silver bits left on the bike. I'm talking about the idler pulley bracket, the front engine mount/isolater, and especially the has cap. I bought a black gas 1125 gas cap off of ebay.
Old:
Pieced out:
New:
Swapping the locks is real easy. Pressing on the bottom compresses the spring and allows you to remove the pin. At that point all the green pieces can be removed and that exposes the screws which you don't necessarily need to remove but it makes pulling the lock cylinders out easier. At that point it is just a matter of putting everything back together in the opposite order they were taken off. There is one o-ring on each lock cylinder and the old one stayed in the cylinder bore, just need to make sure it's on the cylinder before sliding it in.
Old:
Pieced out:
New:
Swapping the locks is real easy. Pressing on the bottom compresses the spring and allows you to remove the pin. At that point all the green pieces can be removed and that exposes the screws which you don't necessarily need to remove but it makes pulling the lock cylinders out easier. At that point it is just a matter of putting everything back together in the opposite order they were taken off. There is one o-ring on each lock cylinder and the old one stayed in the cylinder bore, just need to make sure it's on the cylinder before sliding it in.
