• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Gas tank removel

Buellxb Forum

Help Support Buellxb Forum:

I don't have an M2 so I can't be too specific, but since no one else here has responded yet, you should just have to remove the seat, unbolt the tank, and pull off the fuel line, and then lift it off. That's just standard instructions for more non-fuel injected bikes. If it's specifically the M2 tank giving you a hard time, hopefully someone else here and give you a little more information.
 
it might have those rubber dampeners you have to take off up by the front of the tank. like on the blast. if not upthemaiden should be right
 
If you need more help let me know. All you have to do remove the seat by turning the winged bolt under the seat faring. After that you will see a bolt and clamp at the base of the tank. Remove this while making sure to notice the direction of the clamp. After that pick up the tank alittle and disconnect the fuel line. Next just pick the tank up and slide the hook out at the front of the frame. Then you should be free to do what you needed.
 
Back
Top