IS this a stock exhaust style?

[Castledine]

looking for a 2009 xb12 scg. I havent seen this style on any of the models and cant find it on the webs at all. The sweeping back exhaust port is throwing me off, but, i may buy it if its a true stock exhaust, as i cant stand my hawk right now, and cant source one anywhere else.



https://www.nosoemparts.com/products/nos-new-oem-buell-xb-muffler-s0110-1as

 

[34nineteen]

It was on a lot of Ulysses models

 

[Barrett]

factory installed stock OEM 1203cc muffler for all Buell XB X....XT....Stt models.

 

[Castledine]

Thanks alot! So, I'm guessing it won't actually fit the scg then, as the those models are the longer frame?

 

[Barrett]

Thanks alot! So, I'm guessing it won't actually fit the scg then, as the those models are the longer frame?

It will fit your 2009XB12 just fine. the muffler outlet just has a slightly different bend and length to accomodate off-road forays. dimensionally, all else is identical including the muffler valve and cable attachments.

 

[Castledine]

That's fantastic to hear. Thanks. I may try and trade the race EMC and exhaust with someone that has the stock.

 

[Cooter]

Ill do that trade I have a beautiful stock 12 muffler in a box.

 

[cvc]

I'll second that if Cooter changes his mind!

 

[Cooter]

CVC I have a nice Drummer I fixed by adding 2.25" stainless dual outlets. I has a super deep tone and runs perfect with a Buell Race ECM, but it's just a little loud for me. The Race exhaust is also an empty can like the Drummer but the smaller outlets keep the noise down a little. Maybe you'll like the one I put tips on?

 

[Castledine]

PM'd you cooter.

 

[cvc]

Cooter, thanks for the offer. But .I Have a Hawk on the XT and it is ok and a magnaflow on the SS and after the "glass" burned out its stoopid LOUD so I'm thinking to swap the Hawk to the SS and use a stock muffler on the XT for long distance rides. I have two stock XB mufflers but not with the Uly outlet. I am also toying with a new Magnaflow and relocating the I/E cable to one tail pipe outlet with a butterfly valve I saved from e custom exhaust job on a 7 series BMW and putting a stack of 1" id fender washers on the other side spaced like a silencer for a gun, similar to a Supertrap , then tinker with opening and closing rpm .