Looking for files since xopti is dead

[moose09876]

Hi, I'm looking for the DDFI2 ADX file for tunerpro so I can do a TPS rest. I did all this 5 years ago with my XB9, but promptly deleted everything and forgot how to do it. LOL Any help would be great. Thanks!

 

[AZmidget91]

All XDF and ADX files are on ecmspy.com

 

[moose09876]

That's where I got them from. Rephrasing question: I'm following the steps below, but the drop down menu in the toolbar is blank. Any ideas?

2007 down bikes use the tps reset feature.

1. Back out tps knob fully and flip throttle so it is 100% closed.
2. go to live data side with my ADX and connect. on the tool bar select the drop down and select reset TPS.
click send... done

 

[AZmidget91]

You need this file

https://drive.google.com/open?id=0BxwRrzLypVdzXzJvZkd6MmNUbnM

http://www.buellxb.com/forum/showth...T-now-will-clear-codes-TPS-reset-and-run-diag

 

[onetuford]

That's where I got them from. Rephrasing question: I'm following the steps below, but the drop down menu in the toolbar is blank. Any ideas?

2007 down bikes use the tps reset feature.

1. Back out tps knob fully and flip throttle so it is 100% closed.
2. go to live data side with my ADX and connect. on the tool bar select the drop down and select reset TPS.
click send... done

I had the same problem, and it took me a while to figure out the blue sideways arrow thing.

 

[moose09876]

Well, 1/2 user error 1/2 "why does it do that??". It won't populate that field until it connects. DDFI2 file works great. Thanks again!