Hello all, I'm new to these forums as well as to my 01 buell blast. I recently bought it for pretty cheap with a broken front isolator bracket, the "do not remove" one. I found a replacement on eBay but I just wanted to know if anyone could provide the knowledge of the easiest and quickest way to complete this procedure as I can't find any videos or clear written one. Thanks everyone so much and hope to hear from you guys soon!
Motor mount bracket broke
- Thread starter NickolasW
- Start date
Help Support Buellxb Forum:
user_deleted
Well-known member
jetlee
Well-known member
Follow the instructions to remove the isolator.
Then replace the bracket with new grade-8 bolts of same size (note they are two different lengths) and using red loctite. Torque until it's tight enough, then some more. There's actually a torque spec around here somewhere, in the manual as well.
Follow instructions to install new isolator.
Then replace the bracket with new grade-8 bolts of same size (note they are two different lengths) and using red loctite. Torque until it's tight enough, then some more. There's actually a torque spec around here somewhere, in the manual as well.
Follow instructions to install new isolator.
