• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

.Msq file?!? I am trying to load a race map.. assistance?

Buellxb Forum

Help Support Buellxb Forum:

NwRider

Well-known member
Joined
Apr 24, 2011
Messages
1,121
I am attempting to load a race map on my stock ecm using ecmspy(01 x1). I have maps that were shared with me but all are .txt files. When I load it only recognizes .msq files.

Can I convert the .txt to .msq? Am I missing something simple?!?!


Thanks!
 
There are some really good threads on here about this, may be a little difficult to find some of them.

here is a tip I used from a different thread

"Worse comes to worse, open the race map, copy over the fuel/timing maps, then manually input them into the eeprom you read from your bike and burn changes. It's an extra step, I know, but it'll at least get you to where you want to be."-theoctopus

here's the thread: http://www.buellxb.com/Buell-XB-For...Scg/Race-Kits/ECMspy-Trouble-loading-race-map
 
Forget that last quote.

Those .txt files are probably full EEPROMs. Try loading them as such in ECMSpy and report back. If they populate all the parameters, they're full EEPROMs, in which case you can navigate over to the maps tab and save them. Then load your current EEPROM, go to the maps tab again, load the .msq file you saved from the race EEPROM, and burn changes.
 
Tanks Octo... that mad perfect sense and yes the .txt file I had was the full EEPROM. But just like on the thread BPlass linked to I have a different version. My stock EEPROM is BUEJA120 and the race EEPROM is BUEKA120.

So from what I undertsand I either need to manually enter all the maps or find some one to share the .msq file or a BUEJA120 EEPROM with me?
 
save your eeprom, load the race eeprom, save race maps, load your saved eeprom load race maps and burn
 
Gotcha. I thought I could only save maps after they burned. But your saying i can save them after loading only! I will try it.

In the mean time i found and burned some ones custom maps with great success. She runs like a pissed off gorilla. Best she has run since she has been mine.

I want to se the difference between this custom map and the race map. Choose the best one and see of i can't improve out from there.

Thanks guys... Its like a new bike!
 
Back
Top