Need 08 XB12ss tuning maps

[Paniller]

I'm assuming I just need the fueling tables? Anything else to make it run better?

I have a K&N, breather reroute, and partially gutted XB9 exhaust. The picture is below.

Can you guys send maps that you think will work to my email? [email protected]

You guys rock, thanks.

 

[Stevenc150]

Could try the Race XB9 maps for starters: ECMSpy EEPROMS

 

[Paniller]

It's a 12, not a 9. I have that listed in the title, but the post never mentions it.

I don't see much for 08's, but thank you. I should be able to get going from there by comparing different tables. I'll compare a previous year's race ecm, extend the tables to match up with my 08, then probably make my own that's halfway between the two to start.

 

[Paniller]

Can anyone mail me a .bin file to play with? Doesn't matter the year, I just want something to play with while at work.

 

[theoctopus]

Just open the .epr file with TunerPro. It opens directly. You can take any of the EEPROMS available through this site. Only the .txt files don't read true.

 

[Paniller]

The only .epr file I was able to find was for a 2000 X1 from https://sites.google.com/site/ecmspy/home. Everything else is just fueling tables that obviously won't load.

It's a start though, gives me something to practice with while at work. I'll just pull my .epr from my 2008 XB12 when I get home.

 

[theoctopus]

What's your e-mail?

 

[Paniller]

[email protected], up in the top post =)

X1 map doesn't really help me without the other file for those eeproms. So, I was just reading up and waiting until I get home.

(probably not a good idea to mess with tuning at work and get stranded)

 

[Paniller]

Looks like I'm stuck with a BUEOD ecm. I can't find the xdf for this file, so I'm stuck using ecmspy the old school way. It looks like it's 16 x 16 tables instead of 12 x 13 tables though. I can't find a race ecm for the 16 x 16 tables.

So, using ecmspy:
1)Read stock ecm, save stock ecm
2)Read the 06' race table I found as "read ecm". Saved it
3)Compared the 2 saved files, found the fuel and timing sections
4) Added blank rows/columns in the race file where they belong so it's a 16 x 16 table.
5) Filled in these gaps by averaging the two next to it and making it linear (ex: new 25% TPS is a value between the 20% and 30%)
6) Copied these tables to the stock ecm (saved as a new named in case of problems)
7) Loaded the eeprom image into ecmspy then burned the maps only

How's that sound? I didn't run the bike yet, wasn't feeling well so I took the car today. I'll send my file to our archives guy so other people don't have to deal with this mess later

 

[Paniller]

Oh, also smoothed out any extreme timing changes. The race map goes from 10 to 25 in some spots. Too extreme for my tastes. I used 16 for those. I may add later, but not all at once.