NEW XB FUEL PUMP REBUILD KITS ready to ship!

[user_deleted]

FUEL PUMP KITS FINALLY COMPLETED AND READY TO SHIP

Complete XB fuel pump rebuild kits now ready to go. I assembled these from OEM parts left in stock along with US and Jap spec parts where required. NO CHINESE GARBAGE! In essence what you'll be doing is disassembling the entire pump assembly, cleaning up the housing base and internals, throwing most everything else into the trash, and assembling with all new parts. The result will be a complete as-new fuel pump. NOTE: this kit will fit the 2003 early style “long tube” pumps but you'll need to re-use the 2 rubber internal lines and the 3 motor-to-housing O-rings.....just clean and re-clamp them to the pump assembly. Each full kit includes the following new parts:
pump motor
pump suction sock filter
outlet high pressure filter PART # P0101.02A8
outlet high pressure filter bushing kit(2 pieces) PART # P0164.K
high pressure regulator supply fuel line
two(2) fuel line clamps in either Oetiker or worm drive style-your choice
fuel pressure regulator-factory pre-set to 52psi
regulator-to-housing sealing O-ring
regulator pintel O-ring
housing-to-frame O-ring(quantity 2) PART # P0121.02A8A
fuel level sensor assembly-PART # P0789.KA
submersible wire-tie for wiring harness

NOTE: the filter bushings and the housing-to-frame O-rings MUST be assembled with either O-ring silicone lube(preferred) or Lubri-plate lube. you must supply your own.

As of 4-4-2019 the factory supply pipeline and all dealers are out-of-stock on all new pumps and virtually all of the pump rebuild parts. Part numbers are NLA and no plans to ever be re-listed.

Total kit price will be $189 and $6 USA freight.
Canadian freight price via USPS first class approx. $25
World-wide freight price via USPS first class air is $29/USPS priority air is $37

To order your kit either PM or email me. i had also mentioned this before but if you're not comfortable with rebuilding your own pump simply ship to me and i'll rebuild it for a reasonable fee plus the kit and return freight charge.

I ALSO HAVE NEW-IN-BOX NOS PUMP ASSEMBLIES FOR $289 WHICH IS APPROX. $100 BELOW ORIGINAL DEALER SUGGESTED LIST PRICE.

John

[email protected]

 

[Dobe1]

 

[user_deleted]

FUEL PUMP KITS FINALLY COMPLETED AND READY TO SHIP

Complete XB fuel pump rebuild kits now ready to go. I assembled these from OEM parts left in stock along with US and Jap spec parts where required. NO CHINESE GARBAGE! In essence what you'll be doing is disassembling the entire pump assembly, cleaning up the housing base and internals, throwing most everything else into the trash, and assembling with all new parts. The result will be a complete as-new fuel pump. NOTE: this kit will fit the 2003 early style “long tube” pumps but you'll need to re-use the 2 rubber internal lines and the 3 motor-to-housing O-rings.....just clean and re-clamp them to the pump assembly. Each full kit includes the following new parts:
pump motor
pump suction sock filter
outlet high pressure filter PART # P0101.02A8
outlet high pressure filter bushing kit(2 pieces) PART # P0164.K
high pressure regulator supply fuel line
two(2) fuel line clamps in either Oetiker or worm drive style-your choice
fuel pressure regulator-factory pre-set to 52psi
regulator-to-housing sealing O-ring
regulator pintel O-ring
housing-to-frame O-ring(quantity 2) PART # P0121.02A8A
fuel level sensor assembly-PART # P0789.KA
submersible wire-tie for wiring harness

NOTE: the filter bushings and the housing-to-frame O-rings MUST be assembled with either O-ring silicone lube(preferred) or Lubri-plate lube. you must supply your own.

As of 4-4-2019 the factory supply pipeline and all dealers are out-of-stock on all new pumps and virtually all of the pump rebuild parts. Part numbers are NLA and no plans to ever be re-listed.

Total kit price will be $189 and $6 USA freight.
Canadian freight price via USPS first class approx. $25
World-wide freight price via USPS first class air is $29/USPS priority air is $37

To order your kit either PM or email me. i had also mentioned this before but if you're not comfortable with rebuilding your own pump simply ship to me and i'll rebuild it for a reasonable fee plus the kit and return freight charge.
John

[email protected]

 

[Chicknstripn]

I have my kit on the way!
Thanks John!
Looking forward for spending some quality time with my bike! Between this kit, the wheel bearings I got from you, and some new spark plugs I'll have a practically new ride!
Thanks again for putting this kit together!

 

[user_deleted]

I have my kit on the way!
Thanks John!
Looking forward for spending some quality time with my bike! Between this kit, the wheel bearings I got from you, and some new spark plugs I'll have a practically new ride!
Thanks again for putting this kit together!

always my pleasure carlos. i need to temper my enthusiasm and response to your kind words as Opto says i'm not only creepy but a hermit.....so don't want to alarm you.

 

[34nineteen]

always my pleasure carlos. i need to temper my enthusiasm and response to your kind words as Opto says i'm not only A BAD ASS but a HELL OF A GREAT GUY.....so don't want to alarm you.

Fixed it for you!

 

[The Bob]

I'm pretty sure that the lunatic isn't a hooligan also.

 

[wickedchop]

^^^^^^^^ Then apparently you don't know John. Worst one out of all of us!!!!!!

 

[atank]

Will this FP rebuild kit fit an 05 XB9 City X ?

 

[user_deleted]

Will this FP rebuild kit fit an 05 XB9 City X ?

yes sir it will. email me and i'll get you fixed up.
[email protected]

 

[Cooter]

Will this re-build kit fix the glowing headers I got after installing the Hell-Fabio-Fire open exhaust mod?

I ordered exhaust from him but he just mailed me a Saw-Zall


:angel:

 

[rchuff]

Hey Cooter it's not right to crap on someones sales post. If you are not interested then just move along!!

 

[Silverrider]

^^ come on Boys . :applause:

 

[Cooter]

It's a joke, McFly.

 

[njloco]

Common rchuff, you know this is totally different and it's a joke, don't hold grudges except if it's aimed at sucks*s84 !

 

[rb70383]

...this place at times...

 

[Cooter]

Sort of like a family, right RB?:angel:

 

[Theycallmecrash]

Hey Lunatic, interesting kit. I’ve been selling a rebuild kit similar for a few years now. And It looks like you are using fuel hose as seals for the filter. This also looks only to be partial kit, only for 05-09 XBs.

 

[rb70383]

Sort of like a family, right RB?:angel:

 

[user_deleted]

Hey Lunatic, interesting kit. I’ve been selling a rebuild kit similar for a few years now. And It looks like you are using fuel hose as seals for the filter. This also looks only to be partial kit, only for 05-09 XBs.

Hey Lunatic, interesting kit.
coming from you i'm not sure how to take that?

I’ve been selling a rebuild kit similar for a few years now.
that's very nice


And It looks like you are using fuel hose as seals for the filter.
can be used for pressure filter fitment on 2003 model...or for spares.
in your haste to criticize me and what i'm trying to do for board members you failed to see OEM part # P0164.K----qty 2.....high pressure filter bushings.....which come with kit.

the inherent difference between you and i is that my intentions have always been to keep these aging bikes on the road, give board members access to obsolete parts, and provide parts...when i can...at or near dealer cost to board members. you're simply here to drum up business for your shop.