- - POST YOUR scg PHOTOS AND UPGRADES - -

[Route0766]

This is a good opportunity to share photos of your BAD ASS scg !

STOCK ==>

 

[twoguns]

here ya go... does this work as we didnt get the scg in australia.

my lady's city x. converted with full Scg kit. drummer exhaust and map. factory ltd edition 'lightning' plastics.

but then the plastics do change regularly...

with 9 different panel sets.

 

[Route0766]

I like the Orange sets!!

 

[Lesley]

I dont know about it being all bad ass but if you'll click on my name it should take you to my profile. From there you can see all the pics I've posted. Buellxb has changed this page and I can't see my own photos anymore. I guess they are still there. As of today I have 37,000 miles on mine. Check it out if you get a chance.

 

[EricZ]

Engine

Bottom End

2007 XB Crankcase
Screamin Eagle Lefty Crankshaft Bearing
2008 XB12 Crankshaft—Welded and Balanced
Carrillo Rods

Top End

9.0:1 Compression Ratio
3.498” custom CP Forged Pistons—Ceramic top coating and Teflon skirt coating
Total Seal Gapless Rings
XB Cylinder Heads—70.5cc combustion chambers (unshrouded and sunken valves), 1.9" Baisley Twin Cam intake valves, 1.61" AV&V Twin Cam exhaust valves, Manley beehive springs with titanium retainers and light port work
Cometic MLS Gaskets-- 0.040” Head and .020” Base
Buell Race Cylinder Studs

Valvetrain

Stock XB Camshafts
Stock Lifters, Pushrods and Rocker Arms

Oiling System

2007 XB Oil Pump
Bronze Oil Pump Drive Gear
Electric Turbo Oil Scavenge Pump with Bronze Helical Gears
Setrab 10 row oil cooler
-6AN oil cooler lines
K&P Engineering Black Anodized Oil Filter

Intake

Stock 49mm Throttle Body
2008 Throttle Cam
Port Matched Intake Manifold

Exhaust

Jet-Hot 2000 Coated Custom Header
304 Stainless Exhaust Plumbing

Turbocharger

Garrett GT2252 Turbocharger
Turbosmart Ultra-Gate 38mm Black External Wastegate
6061 Aluminum Intake Plumbing
Turbosmart Kompact Stealth BOV
Black Silicone Intake Couplers
Stainless T-Bolt Hose Clamps
1psi Oil Supply Check Valve
K&N Conical Air Filter
Aquamist 1S water injection

Fuel System

TRE 255lph Fuel Pump
Turbosmart External FPR
Earl’s Super Stock -4AN Lines
Fragola -4AN Black Fittings
Seimens Deka IV 80lb/hr Injectors

Primary Drive

2008 38T Primary Sprocket
2007 XL OEM Clutch Basket
Evolution Industries Stage 1 Clutch Hub and Plates

Transmission

Andrews stock XL ratio gear set--Cryogenically treated and race prepared by R&D Motorsports

Final Drive

PBI 21 Tooth 530 Front Sprocket
DID 530ZVM-X Chain
PMP Sprockets 44 Tooth Rear Sprocket

Chassis

2005 XB Frame
2008 XB Long Swingarm
Showyomoto Iron Front Fairing
Adrenalin-Moto Right Side Scoop
Diesel-Moto Subframe Spacers
Chopped Tail Section

Suspension

2005 XB12Scg 41mm Forks
Custom Penske 8970 Rear Shock

Brakes

Nissin 19mm Radial Front Master Cylinder
ASV C5 Black shorty lever
Buell 8-pot ZTL II Front Brake Caliper
Braking Wavy Front Rotor
Brembo 2-pot Rear Caliper
Braking Wavy Rear Rotor
Darkhorse Rear Caliper Bracket
Spiegler Brake Lines

Electrical

Alien Motion 12 Cell LiPOFe4 Battery
Custom Wiring Harness
LED Indicator Lights
Autometer Z-series 2 1/16” Tachometer
Autometer Z-series 2 1/16” 30psi Boost/Vacuum Gauge
Turbosmart e-Boost 2 Electronic Boost Controller
AEM X-Wifi Dual EGT module
Delphi Mini-Switching O2 Sensor

 

[thumpin1203]

I'm humbled by comparison to Eric's masterpiece above ^^^^ but here's mine!

And my favorite modification by far is the reservoir cover.. it's a bit cryptic for new buellers, but quite cypherable by the "old guard"

"FIGHTR" is the runt of my litter, but handles the best IMHO!

 

[oh9bolt]

I want that reservoir cover!! [up]

Not a S but I have a RCG, can I play?

 

[augustus_01]

I sure miss it.....

 

[thumpin1203]

Cool pic oh9!... very "ominous" with the dark clouds, reminds me of this old Buell video. http://www.youtube.com/watch?v=VzDZf1mLIFA
Call Alisha or Randy at Knight designs for the cover(cheap BTW), the program file should be under my name..

 

[Route0766]

My Friend's scg... is it not cool?

 

[BikerTrash]

- powder coated foot pegs, rear brake pedal, shifter lever/linkage/pivot, idler pulley fork
- black 1125CR gas cap
- painted rear shock spring, front motor mount
- CityX handguards, headlight grill
- plastics painted flat black
- HID low beam
- ProTaper SE Carmichael handlebars
- Aprilia Tuono Mirrors
- tail chop
- XBLights LED tail light with smoked lens
- blue iridium turn signal bulbs
- Select seat.
- EBR ECM
- K&N air filter

 

[lightning SS]

Ive had this pic in a thousand pieces a few times lol....