Hello brothers and sisters. Can anyone help mith my problem... I cant get my rear svinger off my S1. Do i have to dismount the bracket that holds the engine ??? And last... I have the rear svinger from an M2 to put on insted. I that going to give me a problem ??? Best regards from Denmark. Peace.
-
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
Rear svinger
- Thread starter joe olsen
- Start date
Help Support Buellxb Forum:
Stevenc150
Well-known member
- Joined
- Aug 12, 2008
- Messages
- 5,146
Check here for a manual for your bike. Should show step-by-step how to do it: BuellMods.com Manual Downloads
pur pony
Well-known member
yes, look at the manual and look around badweatherbikers.com
On the s1, the frame needs to be spread apart. you do not have to remove the rear engine mount. The M2 swingarm will bolt right on. I suggest getting new isolators though, they have been updated and while you have the swingarm out it may be wise to change your belt depending on condition.
On the s1, the frame needs to be spread apart. you do not have to remove the rear engine mount. The M2 swingarm will bolt right on. I suggest getting new isolators though, they have been updated and while you have the swingarm out it may be wise to change your belt depending on condition.
Similar threads
