Reflector headlight Buell XBR

Buellxb Forum

Help Support Buellxb Forum:

RedBuells

Member
Joined
Aug 19, 2009
Messages
6
I'm looking for a reflector or a lamp where the reflector in it, it's the one that always on when ya start the motor, but i wanna have the other on and there is no reflector in it so when i installed my xenon the left one is good and the other is blinded for traffic, and with the reflector in it it's good.
 
He's talking about how the low beam has a reflector to block excess light from blinding people, therefore creating a nice horizontal beam, whereas the high beam has no such "light blocking reflector". Although I can't help you any more than by suggesting you buy a second low beam housing, I hope I have cleared some confusion.
 
Having two lows kinda defeats the purpose....if you replace your high with a low those.nice xenon light bulbs you got would be going to waste. Just my opinion though
 
Dusty, he doesn't want two low beams. The reflector in the low beam is missing so his low beam is too blinding. He is looknig for a stock low beam to get that reflector back.

3100_20101201072618_L.jpg
 
but i wanna have the other on and there is no reflector in it so when i installed my xenon the left one is good and the other is blinded for traffic, and with the reflector in it it's good.

Sounds to me he wants two low beams [confused], I would just take the reflector out and blind the piss out of people, better to be seen and hated than missed and toasted;)
 
The left one (high beam) isn't as bright as the low beam (with the reflector out). The low beam is angled higher so when the reflector is out, it is bright as hell!

I would know cause my HID is blinding now that my reflector is shaved.

3100_20101201072618_L.jpg
 
even if you put a spoon (the part you are calling a reflector) in the high beam its still a high beam just with a cut off, the reflectors (the shiny part in the back) are different shapes
 
Okay to avoid further confusion, i believe querdo asked the same question on a dutch buell board (here)

I'll loosely translate it for you guys:

He's looking for a reflector that is housed in the headlight of the xbr. He wants to go duel lights on (he says he knows how to wire it). since the high beam doesn't have a reflector, he doesn't want to wire it for duel light on yet. So he's looking for tips or suggestions.
 
Thought he said he had the firebolt?.. flip the high beam switch and tada! Both lights on..
 
I think I got this. He wants to run BOTH low beam projectors on both left and right sides (Firebolt, XB__R) because they have a cut off shield (which people are mistakenly calling a reflector). He wants to run both lights all the time, using both low beams so he doesn't blind people.

RedBuells, go to www.buellsterparts.com They have what you want.

~Mike........
 
Back
Top