• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

rizoma mirrors and tailpeice

Buellxb Forum

Help Support Buellxb Forum:

fitzy2824

Well-known member
Joined
Sep 11, 2008
Messages
61
i done these a while ago but after i got the parts (from UK to AUS) i realised i had forgot to order something to hold the number plate on, so out came a bit of stainless and grinder! yea i know the indicators are a bit goofy on there, can anybody recommend any other types of indicators?
i thought it was about time to get some pics up!

2482_20090702045828_L.jpg


2482_20090702045743_L.jpg


2482_20090702045808_L.jpg


2482_20090702045725_L.jpg
 
I made the same type thing except I used the two torx screws at the edge of the tail piece, and the bracket angles the opposite way. I did that because I wanted to minimize the plate's obstruction of the kicked-up light feel of the tail of my bike. Yours look good though as well.
 
I used a set of Motrax blinkers on mine. Picked them up from Cyclegear.com Your bike looks sharp!
2669_20090318174912_L.jpg
 
Sorry for the third post, but I just found some better pics of these lights that I took during the tail chop/light install process in case any of you were interested in them...

3525_20090705063300_L.jpg


3525_20090705063412_L.jpg


As you might be able to tell from the last picture, they just barely extend past the radius of the plastic part, but it's barely noticeable.

PS - you'll need to change your blinker to use these. Got mine from Pep Boys for about $11.
 
turn signals are safer but not required in MI.
although for night riding i did add LED bolts to secure the plate, which act as turn signals but can only be seen at night.
 
oh yea awesome.. in aus only the old vintage bikes that didnt have indicators as stock are aloud to not have them.. i think thats the rule
 
Back
Top