I have a 09 1125cr and i want to run my bike with both sides of the headlights. I would like to make my bright headlight just be a normal headlight and run them both. Then i want to install bright lights on the bottom of my bike shinning out on the street. Any suggestions?
Run with both headlights.
- Thread starter KC1125CR
- Start date
Help Support Buellxb Forum:
konarider94
Well-known member
- Joined
- Sep 12, 2009
- Messages
- 4,230
dont mess with the already fragile electrical system on the 1125. That is my suggestion.
I have the same bike and both my headlights run at the same time. The PO may have done that, I'm not sure. But you can't make them shine on the same thing. The reflectors are angled differently to make the two beams.
With the two extra lights, are you just going for a look, or is more light the overall goal? If it's just light HID's would probably do you just fine. And there's a screw on the underside of the headlight assembly that you can use to adjust the beams up and down to suit you.
With the two extra lights, are you just going for a look, or is more light the overall goal? If it's just light HID's would probably do you just fine. And there's a screw on the underside of the headlight assembly that you can use to adjust the beams up and down to suit you.
03Firebolt9R
Well-known member
- Joined
- Jan 19, 2009
- Messages
- 1,266
Yeah, like Kona said. I wouldn't put anymore on the charging system. I run both headlights too, I just flick the HB switch on.
Similar threads
