shock adjusting tools

[jbean]

Where do I get tools to adjust the spring on my 01 Cyclone

 

[03Firebolt9R]

Are you referring to a spanner wrench. You can probably find one if you googled it. But if you cant, a large pair of channel locks will also do the trick. I recommend using a rag too. Good luck.

 

[Midnight82]

Cycle Gear sells them

 

[RHard]

Does ASB still sell the wrench?

 

[BuellerPilot]

If your just loosening it, a large flat tip covered in a rag works no problem. I just smacked it with my open hand striking the driver with my palm. Took only a few seconds and didn't leave a single mark on the prelaod adjuster at all. Now if you want to tighten it, that may require a heavier blow, like a mallet. Just be sure to wrap the end of the driver with a rag so if you miss or it bouces off your not scratching stuff up.

~Mike.....