J jim420302 New member Joined Jun 30, 2008 Messages 4 Jul 5, 2008 #1 anyone tell me the part # for ngk iridium plug for 2003 xb9r thanks for the help
P Phrogg Well-known member Joined Aug 6, 2007 Messages 197 Jul 5, 2008 #2 part # 6546 referral # 1631262
B buellsxtc Member Joined Feb 13, 2010 Messages 17 Feb 27, 2010 #3 what should i gap those ngk's to for the 03 xb9r?
S Stevenc150 Well-known member Joined Aug 12, 2008 Messages 5,144 Feb 27, 2010 #5 part # 6546 Click to expand... That's the stock # for DCPR8EIX. Most of us use the DCPR9EIX, which is a colder heat rating since our motors run so hot.
part # 6546 Click to expand... That's the stock # for DCPR8EIX. Most of us use the DCPR9EIX, which is a colder heat rating since our motors run so hot.
D driftingswiftly Well-known member Joined Nov 9, 2008 Messages 449 Feb 27, 2010 #6 if you do end up gapping them, be careful not to break the tip. They suggest a wire gapping tool. there is a video on another thread somewhere explaining this.
if you do end up gapping them, be careful not to break the tip. They suggest a wire gapping tool. there is a video on another thread somewhere explaining this.
B buellsxtc Member Joined Feb 13, 2010 Messages 17 Feb 27, 2010 #7 alright thanks guys.. i know that they come pregapped for car but i didnt know if they would for bikes... new to the bike forums. Thanks again, Andy
alright thanks guys.. i know that they come pregapped for car but i didnt know if they would for bikes... new to the bike forums. Thanks again, Andy
S Stevenc150 Well-known member Joined Aug 12, 2008 Messages 5,144 Feb 28, 2010 #8 Yeah, they come pre-gapped. I always grab a gap gauge at the counter and swap out if they don't measure .035".
Yeah, they come pre-gapped. I always grab a gap gauge at the counter and swap out if they don't measure .035".
B buellsxtc Member Joined Feb 13, 2010 Messages 17 Feb 28, 2010 #9 thank you sir for that gap number i will do the same tomorrow when they get my plugs in. Andy