Doing the xb9 primary gear swap into the xb12 and my primary chain form my xb9 is to short and the primary chain from the xb12 seems to long[confused] the xb9 primary gear and chain are from a 2003 xb9r and going into a 2005 xb12r motor, is my 03 chain not compateable with the 05 clutch/tranny sprocket or will the chain tensioner take the slack out[confused] So badly want to get the bike running, thanks in advance
-
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
Sprocket/chain compatibility question
- Thread starter RHYNOXB9R
- Start date
Help Support Buellxb Forum:
Got it done, very tight tolerances, you must have the chain, from the 9, on the front sprocket and the rear and slide them both on at the same time, not the easiest, but doable, then set proper chain tension, looking forward to ripping it up with this thing
