suspension guru needed

[stensg]

First of 08 1125r I'm 185lbs with gear.
From 95 to 115mph i get some front end shake if i power through it it will go away. Any advice as to what I should try adjusting first?

 

[Negative]

You running some old tires??... That'd be my first thought is that I have a slightly out of balance tire... I've had a couple of them do this to me as they wear if they wear unevenly.... Or if you let your bike sit for long periods of time, they can develop a flat spot on the tire...

 

[stensg]

Tire is balanced and no abnormal wear that was my first thought so i made sure it was balanced

 

[Negative]

Oh good... Well since you started in the right place and are looking into suspension issues now, I have to assume you checked the rim too then... And that your front rotor isn't bent all outta shape.. And that the caliper isn't sticking.....

 

[stensg]

All that is good i checked the obvious things first. I've played with the suspension a little and it's slowly getting better the more I tweak it, but I really don't have much idea what every adjustment it's going to do till I ride it.

 

[RT Performance]

honestly your best investment would be a gpr damper.
the torque of the 1125r makes the front wheel skip and induces a shake

you first need to set sag 1 1/4" from unloaded to you sitting on it in gear

 

[1125RCya]

Please tell front and rear tire pressures (this has caused and issue with mine also)
Make sure front wheel weights are on the same side as the rotor.
Try making a pass leaning on the tank and with hands and arms relaxed. (haha)

I know your 100% sure its your suspension
Baseline setting from factor 170-190
Front Forks
Preload turned in from minimum -6 (so strat from lowest or -)
Compression;Turns out from maximum- 1 3/4 (so start with max the go backwards(clockwise takes you to maximum)
Rebound; Turns out from maximum- 1 3/4
REAR SHOCK
Preload Shock #1 is the lightest setting- 3
Compression; Clicks out from maximum- 20
Rebound; Turns out from maximum- 1 1/4

Heres someones you tube video to help you understand which setting is which, and how it all work with a "1125R"
http://www.youtube.com/watch?v=rv8DY5Prl5c

 

[1125RCya]

by the way that was for a 2009 someone have to 08 settings? im sure it will get you back to safe riding! lol