tps short to ground and bank angle sensor problems

[stokesxb9r]

Ok I layer my bike down about two weeks ago had almost no damage but now I've loaded the race maps on to the ecm. It will not start and I've got trouble codes for tps and bas what could be going on it says tps short and bas open or short.
Any help is appricated also where do the tps wires trace back to from the sensor into the harness? Also I really could use a wiring diagram


Thanks
Stokes

 

[konarider94]

where did you get the race map from. did you try and load a race eeprom or did you copy and paste teh fuel and spark maps?

 

[stokesxb9r]

Got it from ecmspy and I loaded the eeprom didn't know any other way

 

[konarider94]

what do you mean from ecmspy? the program doesnt come with any race maps. are you talking about a cd that you got with a cable from ebay?

 

[stokesxb9r]

Bought from motomadness.com and the cd had the race maps on it idk if thats what i was suppose too use if not I need race maps lol

 

[konarider94]

there is a good chance the firmware is different on the eeprom. did you save your stock eeprom first? if so put that eeprom back on the bike. if you didnt save your eeprom first im not sure how to get the right one, others will have to chime in. then watch this video to show you how to load just the maps.

http://www.youtube.com/watch?v=JfF3-JNEmy0

 

[stokesxb9r]

Thanx I have my original eeprom ill load it all back up and follow the video

 

[stokesxb9r]

Reloaded original stuff same codes and tps is reading 100% with no throttle input

 

[konarider94]

i cant get at my wiring diagrams right now. but your tps sensor is right on the side of the throttle body. cant miss it. you should be able to trace the wires from there. not sure of location of bank sensor on firebolt

download one of the service manuals at the top of the page