xoptimizedrsx
Well-known member
- Joined
- Jan 21, 2007
- Messages
- 186
New ADX files to reset TPS, run diag and clear codes
I have the DDFI2 done and posted on the website... The new files have a recent date.
http://xoptiinside.com/tuning_programs__files
The ddfi1 and ddfi3 are next. The templates are made, so it will not be long and I'll be done...
you will be able to clear codes and do a tps reset now as well as run test.
All steps are done with the key on, run on but bike is not running...
To do a tps reset
back out TB screw 2007 and older
flip throttle back and fourth to ensure the Tb screw is full off the throttle plate
(It will feel as its getting stuck when closed)
now connect to see live data with the two blue arrows and open the diag screen (little notebook looking thing on tool bar) or use dash screen and set a feature by right clicking it and selecting TPS deg...
move to tps setting values and view current value. click arrows. move throttle to see the values change. Make sure its fully closed. select commands on the Tunerpro tool bar. select reset TPS. click send. you will see the value drop to zero...
Now turn in the know till you get to your desired tps you want and start the bike. next ride it to make sure the AFV is accurate.
after a 30 min ride take a tool (allen and while Idling set the Idle speed to 1000/975 rpm) dont worry about degree. they all very...
To clear codes...
select the blue arrows so its connected in blue. select commands clear codes. press send done..
To run test
select blue arrows so it is connected in blue. select test you want to run. press send.
I have the DDFI2 done and posted on the website... The new files have a recent date.
http://xoptiinside.com/tuning_programs__files
The ddfi1 and ddfi3 are next. The templates are made, so it will not be long and I'll be done...
you will be able to clear codes and do a tps reset now as well as run test.
All steps are done with the key on, run on but bike is not running...
To do a tps reset
back out TB screw 2007 and older
flip throttle back and fourth to ensure the Tb screw is full off the throttle plate
(It will feel as its getting stuck when closed)
now connect to see live data with the two blue arrows and open the diag screen (little notebook looking thing on tool bar) or use dash screen and set a feature by right clicking it and selecting TPS deg...
move to tps setting values and view current value. click arrows. move throttle to see the values change. Make sure its fully closed. select commands on the Tunerpro tool bar. select reset TPS. click send. you will see the value drop to zero...
Now turn in the know till you get to your desired tps you want and start the bike. next ride it to make sure the AFV is accurate.
after a 30 min ride take a tool (allen and while Idling set the Idle speed to 1000/975 rpm) dont worry about degree. they all very...
To clear codes...
select the blue arrows so its connected in blue. select commands clear codes. press send done..
To run test
select blue arrows so it is connected in blue. select test you want to run. press send.
