So I've got a Jardine and the K&N air filter on my 07 XB9R. I finally got my ECMSpy cable and went ahead and grabbed the maps from the race ECM file and burned them into my stock EPROM. First thing I noticed is that the idle went down about ~150 RPM so mid 900 to just about 1000. When I rode to work it was very snappy and the second thing I noticed was that absence of the notorious deceleration popping that used to be prevalent. Later on around 11PM when I left work it was mid 50s F and when trying to start the bike it didn't want to kick over. I had to twist the throttle a little bit and get some gas and hold it for a couple seconds while it idled for a few seconds. I noticed that because of the low RPMs the bike had a longer gap between the idle 'bwap' and the lights would dim a bit each time it did so (as well as the dash light). When giving it a bit of gas it would negate this, but once I got home I began to look at how to add the missing idle RPMs back in. I was hoping to find an easy way through ECMm, but I was quickly directed to TunerPro RT for this. As I'm setting it up it wants me to add the ADX files from http://xoptiinside.com/ . Now I see that BUEIB is for the 07 XB9R, but because I saved the race maps to my stock EPROM do I need to use the B2RIB (factory race ECM)? Thank you for any insight on what to use or what I could do to help solve this.
-
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
TunerPro RT (Race Maps Low Idle RPM)
- Thread starter Spyder171
- Start date
