Tuning Questions XB9SX 2009

[lancruza]

Tuning Questions XB9SX 2009

I've been reading and studying for the past couple of days on EEPROM's and tuning. Here's where I am, so far...

I have a Buelltooth. My bike is an 09 XB9SX. I used a Bueltooth dongle and ECM Droid to read my ECM and find that my ECM ID is BUEYD and DDFI3

My purpose is to change my EEPROM to the race map that matches the OEM race exhaust that I purchased last week. I've been looking for this map for an 09 but have not found said map.
Is this race map available? If so, link?

Here's the list of sites that have helped me and where I've been getting most of my info:

Rev Mo
ECM Spy
ECM Droid
Buellmods

Any extra info that you can point me to would be appreciated. Don't flame me too hard. I'm learning. Thanks

 

[Barrett]

Levan: I don't believe free generic "race maps" for the 08-10 XB9's were ever available, even when this board was active with ECM experts such as Gunter and Mope. Then again I know virtually nothing about ECM tuning, so might be wrong. DDFI3 was tuned with ECMspy Mono....TunerproRT...Xopti also comes to mind.

And of course Tim at https://idspd.com/xcart/buell-products.html

 

[lancruza]

Levan: I don't believe free generic "race maps" for the 08-10 XB9's were ever available, even when this board was active with ECM experts such as Gunter and Mope. Then again I know virtually nothing about ECM tuning, so might be wrong. DDFI3 was tuned with ECMspy Mono....TunerproRT...Xopti also comes to mind.

And of course Tim at https://idspd.com/xcart/buell-products.html

Thanks John. I'm learning. Hope you're doing well.

 

[Barrett]

My pleasure Levan and all the best to you as well. Might want to take a look at this keyboard rumble on here from several years ago. When I see bullsh*t like this I immediately think of Tim at IDS and spending some cash for a pro to upgrade the ECM.

https://www.buellxb.com/forum/showt...9-Race-ecm-maps-does-anyone-know-where-to-get

 

[lancruza]

My pleasure Levan and all the best to you as well. Might want to take a look at this keyboard rumble on here from several years ago. When I see bullsh*t like this I immediately think of Tim at IDS and spending some cash for a pro to upgrade the ECM.

https://www.buellxb.com/forum/showt...9-Race-ecm-maps-does-anyone-know-where-to-get

Hahaha! Yeah... I ran across that thread last night.

 

[Lusiphur]

I just checked the tunes I have and none of mine go past 2007 for an XB9 and 2008 for the XB12

Sorry

Xopiinside.com domain is not being used anymore
But these guys are still in business and this page might be a good start for you

https://idspd.com/xcart/2008-2010-buell-tunable.html?category_id=42

 

[lancruza]

I just checked the tunes I have and none of mine go past 2007 for an XB9 and 2008 for the XB12

Sorry

Xopiinside.com domain is not being used anymore
But these guys are still in business and this page might be a good start for you

https://idspd.com/xcart/2008-2010-buell-tunable.html?category_id=42

Thanks. That's the same thing I've found. 07 and prior are DDFI2. 08 and later DDFI3. DDFI2 stuff EVERYWHERE! DDFI3, nowhere. Barrett probably has the best idea... Just buy one from IDS. But sometimes I like to do things the hard way, AND learn stuff along the way.

 

[Kurlon]

I give the IDS crew full points, very easy to deal with so far, and very helpful.

 

[Jonus]

I've got the same year/model. Path I went was upgrade the ECM firmware to BUE2D at a Harley shop. Then I could load the maps from this site:

https://www.rev-mo.com/maps

 

[lancruza]

I've got the same year/model. Path I went was upgrade the ECM firmware to BUE2D at a Harley shop. Then I could load the maps from this site:

https://www.rev-mo.com/maps

Great idea. Thanks!