Ulysses XB12x 2006 Clutch cable

[fayala77]

Hi everybody!!

does anyone know the part number of the clutch cable of the Ulysses xb12x 2006? or better, does anyone knows where to buy it? thanks

 

[Cooter]

If you live in the United states, there are the usual options:
https://sphdonline.com/products/387...lysses-models-u6a?_pos=4&_sid=b3d8957cd&_ss=r

If you live in Europe, the usual options as well:
https://www.twinmotorcycles.nl/webshop/artikel.asp?mc=1&aid=1652&cid=0&s=clutch cable&a=

 

[Pushr0d]

Is there a cross-over to a Sportster part number?

For the OP, you might check with your local HD dealer - I've found that several Buell part numbers are still active in their system.

It appears the Buell # is 38726-06C.

Good luck!

 

[Barrett]

NO cross-over for the Ulysses/Touring/Police clutch cable
NO XL or XR clutch cable applicable due to completely different inner cable end at lever
Steve is correct with # 38726-06C.......over 45 still in system at multiple dealerships. list is $49.17

NOTE TO X-XT-XP OWNERS: the parts system and assorted schematics show this cable NOT applicable to 2008-2010 models...and superseded by different part number. that is incorrect. 38726-06C fits all years of the X series buells.
the only difference is the sourcing of the cable. new source Motion-Pro provided identical cable BUT with teflon sleeve over the entire inner cable.
all cables are shipped "dry" and should be pre-lubed with cable lube or 3-in-1 oil prior to installation.

and NO............after checking with Motion-Pro production manager Joe Fratis...they do NOT offer this cable to the public.

you're welcome.

 

[fayala77]

thank you all!
i got it at :
https://sphdonline.com/products/3872...3d8957cd&_ss=r

 

[34nineteen]

Spdhonline.com? What is that???

 

[Cooter]

If you live in the United states, there are the usual options:
https://sphdonline.com/products/387...lysses-models-u6a?_pos=4&_sid=b3d8957cd&_ss=r

I need to start using your parts...

 

[motoguy]

Random question...would a Harley lever fit in a Buell mount, thereby allowing use of HD cables instead of (increasingly hard to find / expensive) Buell cables? Possibly a stupid question. I have 0 experience with Harleys, but the Buell ends look pretty much like the japanese ends I'm used to. I understand Harley has some kind of "loop" end on the cable vs the "barrel" of Buell.

 

[Cooter]

IMO not worth the trouble as often as a clutch cable needs to be replaced (50k?). You could have a custom one made for what the Harley stuff would set you back.

 

[motoguy]

IMO not worth the trouble as often as a clutch cable needs to be replaced (50k?). You could have a custom one made for what the Harley stuff would set you back.

Thanks. Barnett quoted me $107 for a new one a couple of months ago. Not the end of the world.

 

[Barrett]

Random question...would a Harley lever fit in a Buell mount, thereby allowing use of HD cables instead of (increasingly hard to find / expensive) Buell cables? Possibly a stupid question. I have 0 experience with Harleys, but the Buell ends look pretty much like the japanese ends I'm used to. I understand Harley has some kind of "loop" end on the cable vs the "barrel" of Buell.

would a Harley lever fit in a Buell mount

NO


but the Buell ends look pretty much like the japanese ends I'm used to. I understand Harley has some kind of "loop" end on the cable vs the "barrel" of Buell.


XB series clutch cable has barrel shaped nipple lever end. XL-XR series clutch cable has closed round loop lever end.