Um, idle adjust screw on 09 xb 12r?

[ConVICK Pitbull]

Is there a different spot on the 09 firebolts for this screw? I am doing a tps reset via daves DIY vid but I fell into a snag with locating the screw. any help would be great.

 

[J_Undisputed]

For 08 and above its a different method.

To reset an 08+ Buell, do the following:
1. Turn on the key.
2. Set the kill switch to the run position.
3. Don’t start the engine. Rotate the throttle from fully closed (gently forced closed) to fully
open (gently held open), and then back again to closed (gently forced closed).
4. Repeat 3 times. Hold each position (fully open, fully closed) for 1 full second.
5. Turn the key off and on.

 

[ConVICK Pitbull]

Thx

 

[Stevenc150]

Don't use ECMSpy on your '09 - It should be used on '07-earlier bikes ONLY. New pay version is for '08+

 

[ConVICK Pitbull]

Why is that Steve?

 

[oh9bolt]

Because 08+ is DDFI3, you need to use tunerpro.

08+ Tuning