Ch4z
Member
Just got her back together and she's been running for a few weeks now. I finally found time to take some pictures. Almost complete, but I'm having trouble with the tune.
I bought the cable and it came with ECMspy and tuner pro. I've read a lot about ECMspy and have done all the precheck procedures (static timing, TPS reset, AFV) So I saved my EEPROM and fuel map files, after that I loaded and burned the race maps and went out for a quick test. Didn't really feel much of a difference. Maybe I had the race tune on the bike when I bought it? I have a few mods and I was hoping the tune would at least take care of the popping from the exhaust. If anyone has more experience with this I'd appreciate the help. I'm still learning ECMspy and will eventually do a custom tune.
Mods when I bought the bike-
RSS
Louder Horn
Foot pegs
K&N air filter
low beam HID
Mods done by myself-
Jardine (stock had a hole)
Tail chop & paint
Licence plate relocation with LED plate frame
Aftermarket blinkers with LED relay mod
ODI grips
Bar end mirrors
Aftermarket levers (foldable, adjustable, extendable)
ECMspy tune
Replaced rear bearing and have bearings for front, steering, and swingarm
Future mods-
Breather reroute
Paint subframe black
Vinyl wrap or paint forks black
Jardine mod (saw somewhere about a mod inside the muffler to gain some torque back)
Also, anyone ride in southeast MI? I met one of you at royal oak bike night a few weeks ago but didn't catch your name, sorry!
I bought the cable and it came with ECMspy and tuner pro. I've read a lot about ECMspy and have done all the precheck procedures (static timing, TPS reset, AFV) So I saved my EEPROM and fuel map files, after that I loaded and burned the race maps and went out for a quick test. Didn't really feel much of a difference. Maybe I had the race tune on the bike when I bought it? I have a few mods and I was hoping the tune would at least take care of the popping from the exhaust. If anyone has more experience with this I'd appreciate the help. I'm still learning ECMspy and will eventually do a custom tune.
Mods when I bought the bike-
RSS
Louder Horn
Foot pegs
K&N air filter
low beam HID
Mods done by myself-
Jardine (stock had a hole)
Tail chop & paint
Licence plate relocation with LED plate frame
Aftermarket blinkers with LED relay mod
ODI grips
Bar end mirrors
Aftermarket levers (foldable, adjustable, extendable)
ECMspy tune
Replaced rear bearing and have bearings for front, steering, and swingarm
Future mods-
Breather reroute
Paint subframe black
Vinyl wrap or paint forks black
Jardine mod (saw somewhere about a mod inside the muffler to gain some torque back)
Also, anyone ride in southeast MI? I met one of you at royal oak bike night a few weeks ago but didn't catch your name, sorry!
