AC_Schnitzel
Well-known member
I'm considering this ball mount that takes place of an existing bolt in the upper handle bar clamp: https://www.amazon.com/Mount-Motorc...pID=419thGSiZsL&preST=_SX300_QL70_&dpSrc=srch
It is an M8 pitch diameter (1.25mm) that comes w/ 3 different screws: 25, 30, 35 m
I believe our bikes use these bolts in SAE... 5/16"-18? This link on SPHD seems to be it, but the description says that on XBs it's for rear iso bolts, swingarm bolts, not exactly handlebar clamp screws: https://st-paul-harley-davidson-bue...andlebar-clamp-bolt-pinch-bolt-rear-mount-b4h
Any thoughts?
EDIT: there is also an option to get just the ball and provide your own bolt... any recommendations for the bolt size? I figure I may be able to take it to a hardware store and get something a little bit longer w/ same grade and pitch: https://www.rammount.com/part/RAM-B-367BU
It is an M8 pitch diameter (1.25mm) that comes w/ 3 different screws: 25, 30, 35 m
I believe our bikes use these bolts in SAE... 5/16"-18? This link on SPHD seems to be it, but the description says that on XBs it's for rear iso bolts, swingarm bolts, not exactly handlebar clamp screws: https://st-paul-harley-davidson-bue...andlebar-clamp-bolt-pinch-bolt-rear-mount-b4h
Any thoughts?
EDIT: there is also an option to get just the ball and provide your own bolt... any recommendations for the bolt size? I figure I may be able to take it to a hardware store and get something a little bit longer w/ same grade and pitch: https://www.rammount.com/part/RAM-B-367BU
Last edited:
As an Amazon Associate we earn from qualifying purchases.
