I have up for sale or trade a 2005 buell Lightning XB9SX. This bike is in mint condition. It looks like it came off the showroom floor. It also has around 4200 miles on it which is super low! The only reason I am selling it is because I want to move on to something different. I want to get $5000 for it which is very reasonable for the amount of work into the bike and the low mileage. Here is the list of current modifications...
-Custom made 3 inch exhaust utilizing the stock muffler. I personally custom made this exhaust with a 3 inch perforated piping through the center of the muffler with fiberglass packing to get rid of the Tinny raspy sound. I also put a Porsche 911 exhaust tip on. Looks very clean and high-end.
-K&N air filter
-Comfort Kit installed
-Factory race ECU installed.
-I also put on Vortex clip ons to replace the handlebars.
-I installed the LSL steering dampener.
-Avon gas mask modification over the headlights with lowered windscreen.
-The front forks are slid down to lower the front end and I installed a brand-new Buell lightning SCG rear shock which lowers it.
-I also installed a different instrument cluster skin.
-I also made a custom LED brake light insert and also performed a custom rear fender chop.
The only damage on the entire bike was from the previous owner who when moving the bike in his garage, he scraped the cinder block wall on the left swingarm which you can see in one of the pictures.
I am located in the Quakertown PA area.
-Custom made 3 inch exhaust utilizing the stock muffler. I personally custom made this exhaust with a 3 inch perforated piping through the center of the muffler with fiberglass packing to get rid of the Tinny raspy sound. I also put a Porsche 911 exhaust tip on. Looks very clean and high-end.
-K&N air filter
-Comfort Kit installed
-Factory race ECU installed.
-I also put on Vortex clip ons to replace the handlebars.
-I installed the LSL steering dampener.
-Avon gas mask modification over the headlights with lowered windscreen.
-The front forks are slid down to lower the front end and I installed a brand-new Buell lightning SCG rear shock which lowers it.
-I also installed a different instrument cluster skin.
-I also made a custom LED brake light insert and also performed a custom rear fender chop.
The only damage on the entire bike was from the previous owner who when moving the bike in his garage, he scraped the cinder block wall on the left swingarm which you can see in one of the pictures.
I am located in the Quakertown PA area.
