All,
Per my previous post, I am taking the shotgun approach to trying to get my X1 to run the way it should. So, one step was to pull the injectors and have them cleaned and operation verified.
I bought a set of '99 X1 injectors on Ebay to send out to expedite the process. Got them back, but they were different than the ones in my 2000 X1.
The '99 injectors are Bosch, quite a bit smaller. They flow 276cc/min at 3bar. DC resistance is 11.7 ohms.
Just got the 2000 model injectors back. They are Siemens, Flowed 248cc/min, DC resistance is 13.4 ohms.
Before I put the bike back together, can anyone confirm that the tan top Siemens are correct for the 2000 model.
Per my previous post, I am taking the shotgun approach to trying to get my X1 to run the way it should. So, one step was to pull the injectors and have them cleaned and operation verified.
I bought a set of '99 X1 injectors on Ebay to send out to expedite the process. Got them back, but they were different than the ones in my 2000 X1.
The '99 injectors are Bosch, quite a bit smaller. They flow 276cc/min at 3bar. DC resistance is 11.7 ohms.
Just got the 2000 model injectors back. They are Siemens, Flowed 248cc/min, DC resistance is 13.4 ohms.
Before I put the bike back together, can anyone confirm that the tan top Siemens are correct for the 2000 model.
