• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Random in-motion stall

Buellxb Forum

Help Support Buellxb Forum:

A

ATFIII

Well-known member
Joined
Jun 20, 2011
Messages
772
Hey gents,

I was riding up to the good old gas station and as i rolled up i was waiting for a pump to open up. One opened up and i began to roll thw throttle before letting out the clutch and the bike stalled. I didnt let the clutch and gave it a little throttle and it stalled. I have the jardine rt5 on stock ecm and it gives me the goold old CEL for my pipe. Any ideas? Just let me know.
 
Not quite sure, but it may just have been a fluke somehow. The bike is trying to adjust to the slip on, so maybe it has something to do with that. Im getting the ebr race ecm an a few weeks to get the power and have it running the way it should. But i need my 5k mile maintenance and tires done first!
 
my xb does this sometimes always when its hot out and low on fuel.its happended 3 times this summer
 
if yours is doing it when it's hot out and low on fuel it's probably overheating the pump
 
I refil every 50 miles, sometimes earlier. It was kinda hot, but i literally just warmed up the bike and rode about 1 mile to the station. Only mods are jardine rt5 slipon. Stock everything else. Thanks for the responses guys!
 
Mine used to do this too, get sandpaper and sand down the grounds on the frame and make sure they are really tight. Also It helped alot when I raised my idle to about 1000 rpms.
 
If '07-earlier, it's behind your LH airscoop (see pic below). If '08-Later it's in the ECM & not user-adjustable.

2339_20090602092410_L.jpg
 

Similar threads

X
Xb12ss missing
Replies
6
Views
12K
Xb12ssQc
X
M
My new-to-me project 1125R
Replies
6
Views
218
motoguy
M
G
06 buell xb12r, no start currently
Replies
4
Views
263
Cooter
Cooter
M
'05 XB9 code 15, need advice plz
Replies
0
Views
532
MoMo68
M
B
`05 XB12R stall at stop/idle - intermittent
Replies
16
Views
6K
Barrett
Barrett

Latest posts

Back
Top