• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Stator wire config help needed

Buellxb Forum

Help Support Buellxb Forum:

B

BuellRonin

Well-known member
Joined
Jun 17, 2013
Messages
383
Long story short, used the Stator DIY...which helped out 100%. Thank you for the write up.

HD warranted my stator, but forgot to look at wires and mark. So now I have a new stator and forgot how they go back into the connector.

need a little help

cheers!
 
D_adams - They are all black. Since I didn't have the new stator in hand I forgot to at my old stator. So I don't know how they go into the fastner.
 
Still doesn't matter which pin/wire goes where, it's a 3 phase stator. As long as each wire from the stator (the 46 connector) matches up to a wire going to the regulator, you should be fine.

xb-stator.png
 
can you post the second part of this manual. Thank you very much. Guess I don't have a correct shop manual
 
Looks like wires need to correspond from the regulator to the stator. Thanks I think I can mark them from this diagram.
 

Similar threads

B
2008 Uly in need of service
Replies
1
Views
6K
Pushr0d
P
L
Service Record
Replies
7
Views
8K
Lakota
L
D
Hello. Been riding Buell for years. Figured I’d join the Forum.
Replies
2
Views
6K
Cooter
Cooter
L
Starter motor really fits out right side of bike???
Replies
17
Views
4K
Cooter
Cooter
D
Throttle tube and maybe cable replacement
Replies
4
Views
1K
34nineteen
34nineteen

Latest posts

Back
Top