• You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

    If you have any problems with the registration process or your account login, please contact us.

Installed new turn signals, weird buzzing noise and don’t flash when I turn them on

Buellxb Forum

Help Support Buellxb Forum:

T

trexm3

Member
Joined
Apr 24, 2020
Messages
24
Put on new turn signals in front and rear and left the license plate light unhooked . Connected the battery back and when I tested them they wouldn’t blink and made a weird buzzing sound almost like it was coming from the horn area. Any clue wtf is going on ? thanks 🙏🏼
 
need a ep 36 led relay from doing some searching , going to grab one now then find the stock relay and switch it out
 
If your new turn signals are LED, they may lead to a fast blinking condition. There are a few threads here about opening up that relay and clipping apart lead #7 on the chip. Works like a charm.
 
Ep36 labeled for led from advanced auto solved all the issues , 13$ and everything works perfectly
 

Similar threads

R
Bike left me with a 1.2 mile walk home...Still scratching my head...
Replies
13
Views
5K
reebis
R
B
2001 Buell Blast - starts and idles fine BUT sputters/backfires/dies when on throttle
Replies
3
Views
10K
Rad_venture
R
M
2004 Buell XB12R No Start Condition
Replies
2
Views
667
njloco
N
D
New turn signals
Replies
11
Views
2K
lowkey
lowkey
X
integrated tail light install/wiring question need help
Replies
8
Views
3K
Cooter
Cooter

Latest posts

Back
Top