RickyBobby
Well-known member
- Joined
- May 4, 2012
- Messages
- 91
Hello Gents,
I have a 2004 Buell XB12s. I was on a ride sunday hittin up the canyons. Stopped at a gas station on the way back and when I started it up the engine light came on. The code says open or shorted fan wire. I started my trouble shooting at the ecm. Where the manual says its wire G6. I put my testing lead on there and triggered the fan manually through ecmspy. I didn't get any voltage from that wire. That should be the voltage line going to the fan correct? Theres two wires that go to the fan. Orange/Black and Yellow/Brown. My understanding is I shouldn't have contunity through the fan and I should be getting a voltage through one of those wires to the fan correct? Is there anything else I can check to diagnose my problem.
I have a 2004 Buell XB12s. I was on a ride sunday hittin up the canyons. Stopped at a gas station on the way back and when I started it up the engine light came on. The code says open or shorted fan wire. I started my trouble shooting at the ecm. Where the manual says its wire G6. I put my testing lead on there and triggered the fan manually through ecmspy. I didn't get any voltage from that wire. That should be the voltage line going to the fan correct? Theres two wires that go to the fan. Orange/Black and Yellow/Brown. My understanding is I shouldn't have contunity through the fan and I should be getting a voltage through one of those wires to the fan correct? Is there anything else I can check to diagnose my problem.
