Flashing Race map to stock ECM?

Buellxb Forum

Help Support Buellxb Forum:

LFTDJEEP

Well-known member
Joined
Feb 13, 2013
Messages
48
[confused] can anyone flash a standard race map to my stock ECM? Ive got a K&N and Magniflow muffler and want to mod the air box but its already running lean. I honestly dont have time to learn how to do this myself with tunerpro or ecmspy, hell, I hardly find the time to ride sometimes.....

I know this would be a "custom" tune but im okay with that as long as its better than it currently is.

Availability? Cost?

I live in Dallas if anyone is local......

PM me if necessary
 
bullshit. buells don't run lean.

So let me ask you, say im cruising down the high way, my AFV comes down to 85 so that it cruises with a stoich AFR. Well then i drop a few gears hit 6000rpm with a correction of -15% to a fuel map thats not properly setup even with enrichments is still lean.... Is it gonna get leaner?....the answer is yes. This is how Buells run lean.
 
o allah, how often? i'm so tired to respond to these brainless posts ...
afv is designed that way, that the bike is running rich 5% in ol, and 10% in wot. if an idiot fucked up his bike or the map or something else and the bike will therefore tend to run lean in open loop, ol learn will add fuel within 3 seconds.
 
Then don't answer the posts ich...lol

It's really not that difficult and doesn't take much time at all. You just need to purchase a cable and the older free version of ECMspy works just fine on pre '07 bikes.
 
Then don't answer the posts ichl
so some braindead idiots start spamming their bullshit over this forum once more?

It's really not that difficult and doesn't take much time at all
it is difficult and it takes quite some time. and no, it's not done by getting a cable.
it requires brain. that's the main constraint.
 
Anyone know of a performance ecm upgrade I know the buell race ignition is obsolete so need to find a diffrent tuner
 
Back
Top