Engine builder
- Thread starter Apexit69
- Start date
Help Support Buellxb Forum:
34nineteen
Well-known member
There are no oversize parts for this motor. Its either brand new parts or someone may be able to do a resleeve. But there are no oversize pistons/rings/bearings or anything like that. I'm pretty sure most of the new parts have been discontinued through Harley, but some MAY be available through VPI (order at your Harley dealer).
Cooter
Well-known member
I would be cheaper and faster to purchase one of the complete 1125 engines that is for sale right now.
Otherwise, any engine builder thats worth a crap can re-build the one you have, depending on why its "locked up" of course.
Otherwise, any engine builder thats worth a crap can re-build the one you have, depending on why its "locked up" of course.
34nineteen
Well-known member
Cooter
Well-known member
Be sure to get a 6-pack of this too:
upaero
Well-known member
You could check with Dave Weaver at Full Spectrum Racing in Orlando. Before you do anything you should determine what caused the problem (e.g., oil starvation, lean condition) so it doesn't happen again. You can look at your fuel pressure using Ecmdroid since the bike has a fuel pressure sensor.
How often do you change tires? Too low tire pressure for motorcycles makes it difficult to properly rotate and control, and in extreme cases leads to a puncture of the rubber. It can even lead to a fatal accident, especially at high speed.When choosing a new model, you should pay attention to every detail, spend some time reading reviews, consult with a specialist and other drivers. Motorcycle tire markings really matter. Understanding what a tread, frame and side walls are, what is the difference between diagonal and radial models, is not useless knowledge. This is a must for a motorcyclist. You can purchase them using https://www.sticky-stuff.co.uk/.
Last edited:
