I’d like to get the bars on my XB9SX up about 1”. The places I’ve found online don’t have any. There’s a placed in the Netherlands that has them. Anybody know if a domestic/ US source? And yeah, I may just get new bars, but riders are just easier
-
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
1” bar risers needed-source?
- Thread starter KIKH400
- Start date
Help Support Buellxb Forum:
Barrett
Well-known member
Sir: follow the instructions below. i did this mod to 2 of my ulysses's in the past and one of my SX models. cheap...works great...nice evening project...rise of close to 1"....then rotate bars and adjust perches till ergonomics suit you. see pic for final fitment.
ORDER N0348.1ADYBP----ORIGINAL LIST $15.85
IT IS ULYSSES TOP HANDLEBAR CLAMP. DO NOT ORDER ADDITIONAL NAMEPLATE EMBLEM.
OR FIND GOOD USED ONE ON EBAY
CUT AND TRIM TO FIT. finished installed product appears as in pic.
you'll also need QTY 4 OF 5/16"x2" CAP BOLTS. source them locally or online.
ORDER N0348.1ADYBP----ORIGINAL LIST $15.85
IT IS ULYSSES TOP HANDLEBAR CLAMP. DO NOT ORDER ADDITIONAL NAMEPLATE EMBLEM.
OR FIND GOOD USED ONE ON EBAY
CUT AND TRIM TO FIT. finished installed product appears as in pic.
you'll also need QTY 4 OF 5/16"x2" CAP BOLTS. source them locally or online.
mike lowary
Well-known member
John that is clever my man! You come up with that one?
mike lowary
Well-known member
I have a new clamp never installed I’d sell if the op is interested. It’s black
34nineteen
Well-known member
This is why he is the BUELL WHISPERER. :up::up::up::up:
Barrett
Well-known member
I'm not talking to you Mike because i got PM's from both Aaron and Shaughn telling me that you hated me. so go away!
LOL
Mike: thanks my friend. i can only take partial credit. myself and a friend of mine on another old forum were both dicking around with this type of mod many years ago, using junk parts we had lying about. both came up with it about the same time and i saved a pic or 2. you take the top clamp...saw out the middle section...use remnants as riser on each side....massage the bottom of each so you have a nice flat surface...and source the longer bolts. hose and cable length sufficient and makes a nice 1" approx. rise on the cheap.
34nineteen
Well-known member
This is NOT true! We told Barrett that you said you were BETTER than him!
mike lowary
Well-known member
Hahaha. You guys are crazy! That’s some macgyver stuff John. I like it
Similar threads
