bigo1125CR
New member
- Joined
- Dec 6, 2020
- Messages
- 1
Anybody did a fork swap on a 1125CR? What fork would easily fit? Would love to fit something like an Aprilia Factory Ohlins front end. Any help or reference post much appreciated
-
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will see less advertisements, have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
1125 CR fork swap
- Thread starter bigo1125CR
- Start date
Help Support Buellxb Forum:
fork swap
I do not know any easy fits for the forks on an 1125. But their are 3 ways that Ive seen it done.
1. you are a machinist and have mills and lathes and you don't need me to tell you anything!
2. Get donor forks and rims and brakes, etc. Then have a company make you a set of custom triple trees to fit those forks to your 1125 (or whatever bike).. probably cost $500-$900 for the custom tree.
3. There are some pre made kits or parts out there to do the swap... for instance I am putting 1125r forks on my X1. Someone makes a stem that I can use on the 1125r forks to allow them to swap directly into the X1 frame. Usually requires bearing changes in the neck...... this type of swap generally requires a bit of research to find the right bits.
I do not know any easy fits for the forks on an 1125. But their are 3 ways that Ive seen it done.
1. you are a machinist and have mills and lathes and you don't need me to tell you anything!
2. Get donor forks and rims and brakes, etc. Then have a company make you a set of custom triple trees to fit those forks to your 1125 (or whatever bike).. probably cost $500-$900 for the custom tree.
3. There are some pre made kits or parts out there to do the swap... for instance I am putting 1125r forks on my X1. Someone makes a stem that I can use on the 1125r forks to allow them to swap directly into the X1 frame. Usually requires bearing changes in the neck...... this type of swap generally requires a bit of research to find the right bits.
34nineteen
Well-known member
Seek out the forum member known as purpony. Or visit his site at http://www.mcmoto-worx.com/. He is the man when it comes to putting XB parts on a tuber.
Similar threads
