1125CR Mirrors on a Lightning

[Krayy]

Hi BPG,

I had an "incident" last week with the STT and ended up with a broken mirror. Rather than replace with stock, I'm thinking of putting the 1125CR with the integrated indicators on. Before I do this, can you see if you can answer these questions:

1. Are the integrated indicators LED or bulb?
2. Do the 1125CR mirrors use a standard 10mm thread like the lightning?
3. Where do the cables exit the mirror stem?

Thanks in advance...

 

[Krayy]

Scratch this request...I went down to the local Buell dealer at lunchtime and saw one first hand. The cables protrude through the bottom of the stalk so will not be suitable. Dang.

 

[mpolans]

Why not? The stalk is off set and you can route the wires down the handlebar next to the forks.