2006 Buell ulysses Red Lights

[samuelseggs]

I just got an 06' ulysses buell, less than 40k mileage.

Initially I noticed that the RPM gauge works only when you twist the handle to the left. I cleaned out the ground wires under the headlamp. However issues persists.

Normally when riding through traffic, I Rev to create awareness so other drivers will notice I'm behind or trying to get pass them. However on this bike when I do this constantly I start getting weird feedbacks, on clear road. It feels like I have hit redline as the bike would not move. I have to turn off bike for about 30min to cool off before all is working fine. Then also I get red light blinking constantly and my speed drops. When I slow down and downshift.. The Red light stops.

Here is a video https://youtu.be/NSr7SbtIjV0

I do not have buelltooth to read codes. However I'm expecting one this week.

 

[Cooter]

I just got an 06' ulysses buell, less than 40k mileage.

Initially I noticed that the RPM gauge works only when you twist the handle to the left. I cleaned out the ground wires under the headlamp. However issues persists.
You need to fix that first
Normally when riding through traffic, I Rev to create awareness so other drivers will notice I'm behind or trying to get pass them. However on this bike when I do this constantly I start getting weird feedbacks, on clear road. It feels like I have hit redline as the bike would not move. I have to turn off bike for about 30min to cool off before all is working fine. Then also I get red light blinking constantly and my speed drops. When I slow down and downshift.. The Red light stops.
Here is a video https://youtu.be/NSr7SbtIjV0

I do not have buelltooth to read codes. However I'm expecting one this week.

You can jump the pins in the diagnostic connector if you don't want to wait. Buellmods.com

 

[samuelseggs]

Any idea how this is done for this bike.

 

[34nineteen]

Rather than this jumper this, jumper that, count the flashes, wait, count the flashes nonsense, he should send you a video of the flashes and you can reply with the correct code, and proper diagnosis for each, please and thank you.

 

[samuelseggs]

Here is a video of the bike
https://youtu.be/NSr7SbtIjV0

 

[Cooter]

:tongue-new:

 

[samuelseggs]

Today I got a Buelltooth device.. Hooked it up and got error 11 TPS too low/short to Ground.

I also checked AFV and it was reading 115% so I reset back to 100%. I tried doing a live test. By starting the bike and taking a live reading.

See video*https://youtu.be/WJ6rIds6odY

 

[34nineteen]

Did you try. Running a test... to see if the TPS is faulty. Or not?

You may want to do. That first. As it may be the source. Of the high AFV.