2009 XB12Ss

[big b]

Here's my 2009 Hero Blue XB12Ss.

Photoshopped the cheese grater out and a mirror.

 

[His_and_Her_Buells]

looks good. I really like the blue with the blacked out frame and everything of the 09's

 

[shilohsk8]

I agree. I wish my 05 came all blacked out.

 

[big b]

His and Hers I saw where you were in an accident. I'm glad you are okay. That sucks about your bike, maybe there is an 09 in your future.

 

[burnteyes]

man that bike is way taller then my scg... never noticed it that much

 

[2StangBK]

Black and Blue looks cool!

 

[joshs74nova]

Nice ride!

 

[big b]

Thanks guys

 

[big b]

Here are a few updated pics.Eliminated the grater added some smaller signals, removed the belt guards and did the hose reroute. Also did the both lights on when bright mod.

 

[Jakkel]

Looks good! [up]
Motrax blinkers?

 

[dave_xb12r]

Is the bottom pic the catch hose? Did you make that yourself?

 

[big b]

Yeah motrax dinky winkaz. And the bottom pic is of the catch line for the hose reroute, I used rubber line originally but I didn't like the way it looked so I changed it to stainless tubing.

 

[dave_xb12r]

Dude thats awesome! good job!

 

[CityXer]

WOW thats HOT![up][cool]

 

[big b]

I have since taken off those goofy mirrors, and added an ebay bar end on the left side. I'm thinking about taken off the passenger pegs and mounts. And I'm switching to Amsoil synthetic this week. Thanks for all of the great comments.

 

[oxygen151]

big b, I love the way you did the breather re-route. What are those clamps you used to attach the line to the oil cooler called? Also, how and where did you attach your breather filter? You must have gone from rubbing tubing to the stainless steel tubing at some point right? How did you go about doing this? Thanks big b, and sorry for all the questions, I just really like the way you did this.

 

[big b]

The clamps and stainless line are some things we had laying around work. I ran the stainless up past the engine and then had a tee and ran one side to another tee at the engine breether hose's and the other I ran back along the frame under the seat were I attatched the breather filter. Were I had to attatch the stainless to rubber I just put a slight flare in the hard line and clamped the rubber over it. I originally did this with all rubber tubing but didn't like the look and I was affraid the rubber hose would not last laying against the hot front cylinder. I have yet to get any oil out of it and there is no oil getting back to the filter.

 

[oxygen151]

thanks big b. it looks great by the way.

 

[mosiac00]

Wow..thats one beautiful bike. I wish mine looked like that.